High Performance

Concrete Sealer

Rollers

May be applied to damp surface, however, do not apply when standing water is present

Paint Brushes

 Always apply a test sample to insure compatibility

Airless Sprayer

When spraying, use a tip designed for flat coatings.

APPLICATION INFORMATION

Apply with , airless sprayer or pump sprayer brush, roller. When spraying, use a tip designed for flat coatings. Apply when surface and air temperatures are above 32 Deg. F and rising. Do not apply if the threat of rain exists. Do not over apply or allow product to puddle. - Always apply a test sample to insure compatibility - Do not apply to a surface that was previously treated with another product - Take care to cover nearby vegetation, glass, plastic and metals. EverSeal may damage them. - May be applied to damp surface, however, do not apply when standing water is present

BENEFITS

  • Produces a waterproof surface
  • - Provides superior mildew protection
  • - Reduces water absorption into the substrate, thus reducing spalling due to freeze thaw and efflorescence, thereby increasing the life of the substrate.
  • - Colorless and non-yellowing protection preserves the natural appearance of the substrate.
  • - Penetrating & breathable
  • - Low VOC - May be applied to damp surfaces
  • - UV Resistant

RECOMMENDED USES

For properly prepared, uncoated concrete walls, foundations, pre-cast concrete, block, brick, clay tile and most aggregate surfaces.


COVERAGE (THEORETICAL)

Coverage will depend on porosity and contour of the surface being coated. Coverage typically averages 250-300 square feet per gallon.


Share by: